Fix KB5030310 Failed to Install with Error in Windows 11

Best methods to solve KB5030310 Failed to install in Windows 11.

KB5030310 Failed to install

Are you looking forward to the latest Windows 11 update, KB5030310, which includes intriguing new features such as Copilot, an AI-enhanced Paint app, and more? These are promising improvements, although KB5030310 Failed to Install trouble can be vexing at times. Several things can contribute to these issues, a slow internet connection, interference from third-party antivirus software, lack of storage space, corrupted update files, hardware peculiarities, or driver problems.

Simple remedies such as restarting your machine or resetting the Windows Update service may help in some cases, but in others, more involved troubleshooting tips are required. Don’t worry; we’re here to assist you in overcoming these obstacles. See: Fix KB5030219 Failed to install with Error in Windows 11 22H2. Now, all you need to do is check out this blog, so you may experience the latest features without the hassle of stopped downloads or unsuccessful installs.

KB5030310 Failed to install in Windows 11

Here is how to fix KB5030310 Failed to install with error in Windows 11:

Check your Internet Connection

Before we dive deep into more technical and comparatively complex ways to solve the concerned error it’s good to start with the basic ones, which is to have a close look at your Internet connection. Check if the internet is working well otherwise follow the steps:

  1. Switch off the router and leave it for 10 or more seconds.
  2. Then Turn on the modem, connect to the internet again, and then check for updates.

Despite the internet connection is not working or is creating any severe issues then reset it:

  1. Press Windows and I.
  2. Click on Network & Internet.
  3. Go to the right side of Settings, move down, and click on Advanced network settings.
  4. Select Network reset.
  5. From the next screen, click on Reset now.
how to fix KB5030310 Failed to install with error in Windows 11
  1. A confirmation dialog will be shown; select Yes.
  2. When the computer restarts; connect to the internet.
  3. After the process is completed, try to install the Windows update once again.

Read: Windows 11 Build 22621.2361 KB5030310 brings Moment 4 update with Copilot

Use Windows Update Troubleshooter

Trouble with KB5030310 failed to install issue? We suggest as the first solution you try the Windows Update troubleshooter. This fix-it tool may quickly update your system and fix the concerned error in a hassle-free manner. The steps are as follows:

  1. Click “Start” and type troubleshoot.
  2. Press Enter.
  3. On the Settings page, click “Other Troubleshooters” on the right panel.
  4. Locate Windows Update and click Run.
Windows update troubleshooter run in Settings app
  1. Wait for the troubleshooter to complete its tasks and follow any provided instructions.

Reference: Use Common Windows Update Troubleshooter on Windows 11, 10, 8.1, 7

Manually Download and Install KB5030310

One of the best remedies is occasionally to manually download and apply the update KB5030310. This method gives you the ability to take command and guarantee that the updating process runs well:

  1. Go to the Microsoft Update Catalog.
  2. Search for the correct version and click on Download.
KB5030310 in Microsoft update catalog with download button
  1. A popup page will open, click on the link to download Standalone file.
  2. Run the update file as administrator after downloading.

Reset the Windows Update Cache

The Windows Update cache plays a pivotal role in ensuring smooth updates for your Windows 11 system. However, when issues like the KB5030310 update installation failures arise, clearing and resetting this cache can be a vital solution.

  1. Press the Windows key and R and type the term cmd.exe.
  2. Hit Ctrl + Shift + Enter.
  3. When User Account Control appears, select Yes.
  4. Copy-paste the underneath cmd command lines sequentially and press Enter each time:
net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
net stop AppReadiness
Reset the Windows Update Cache net stop wuauserv command
  1. To rename the SoftwareDistribution folder run the command:
del %windir%\SoftwareDistribution
  1. To reset the Background Intelligent Transfer Service execute the below command:
bitsadmin /reset /allusers
  1. Again start the services using the provided commands.
net start wuauserv
net start cryptSvc
net start bits
net start msiserver
net start AppReadiness
  1. Exit the Command Prompt and reboot your computer.

See: How to Reset Windows Update to Default in Windows 10

For the time being disable third-party antivirus

Third-party antivirus software can sometimes accidentally interfere with Windows updates, causing difficulties such as the KB5030310 error code. These well-intended protection software may be incorrectly involved in conflicts. In the steps that follow, we’ll show you how to temporarily stop your third-party antivirus:

  1. Find the antivirus icon in the system tray.
  2. Right-click on the icon.
  3. Look for an option to Disable or Pause the antivirus and select it.
  4. Set a time frame (if available) or choose Until I turn it back on.
  5. Confirm your choice.
  6. Install the Windows update.
  7. Re-enable the antivirus after the update is installed by right-clicking the icon and selecting Enable or Resume Protection.

Run SFC Scan and DISM Commands

The inability to install updates like KB5030310 on your PC is sometimes attributable to file corruption or inconsistencies deep inside the operating system. System File Checker (SFC) and Deployment Imaging Service and Management Tool (DISM) commands may be useful in such circumstances.

These instructions will scan, discover, and fix problems in your Windows OS so that updates may be installed without a hitch. Do follow the below-mentioned steps:

  1. Click on Search and type cmd.
  2. Choose Run as administrator.
  3. Type this command and press Enter: SFC /SCANNOW
  4. Allow the tool to complete the task. When you see “Verification 100% complete”, restart the system.
  5. Execute the following command lines consecutively:
DISM /Online /Cleanup-Image /CheckHealth
DISM /Online /Cleanup-Image /ScanHealth
DISM /Online /Cleanup-Image /RestoreHealth
fix KB5030310 Failed to install in Windows 11
  1. Wait for the process to finish.
  2. Restart your PC.

SFC /Scannow, DISM.Exe, CHKDSK Windows 11 or 10

Adjust Alternate and Preferred DNS Settings

Did you know that adjusting your DNS settings might sometimes be the key to addressing update errors like the aforementioned one? DNS (Domain Name System) settings of your computer can impact how it connects to the internet and interacts with Microsoft’s update servers:

  1. Click Start and type the term ncpa.cpl.
  2. Press Enter to launch the Network Connections window.
  3. Right-click your adapter.
  4. Select Properties.
  5. On the new window, double click on Internet Protocol version 4 (TCP/IPv4).
  6. Check the radio box for – Use the following DNS server addresses.
  7. Enter the provided IP addresses:

Preferred DNS server –
Alternate DNS server –

  1. Click OK and close the window.

Update Windows in a Clean Boot State

Another probable way of resolving the KB5030310 failed to install problem is by running Windows Update in a clean boot state. Moreover, this method will help in identifying potential sources of the problem and resolving any resulting conflicts.

  1. Press the Windows key + R, type msconfig, and press “Enter”.
  2. In the General tab, select Selective Startup.
  3. Then, uncheck Load startup items.
  4. However, ensure Load system services and Use original boot configuration are checked.
  5. Move to the Services tab and check Hide all Microsoft services.
  6. After that, click Disable All.
  7. Click Apply, then OK, and restart your PC.

Execute an In-Place Upgrade

When encountering the KB5030310 update issue taking the help of an in-place upgrade can be a crucial step. This method involves reinstalling Windows 11 with your files, preferences, and applications preserved. Frequently, it can fix system inconsistencies and update-related issues, ensuring a successful installation. Check out the steps mentioned below:

  1. Visit the website where the ISO file is found.
  2. Scroll down and locate – Download Windows 11 Disk Image (ISO) at the bottom part of the page.
  3. Click on the dropdown and select the option saying – Windows 11 (multi-edition ISO).
  4. Then click on the Download option.
  5. Choose product language.
  6. Then, click on Confirm.
  7. Now click on 64-bit Download.
  8. Come back to the location where the file is saved.
  9. Right-click on the iso file and select Mount.
  10. Launch the setup.exe file.
  11. Select Yes on UAC for approval.
  12. Once you notice the Install Windows 11 wizard; click on Next.
  13. On the license agreement window; go with – Accept.
  14. The setup will scan for existing space and display the Ready to Install page.
  15. Check the option that reads Keep personal files and apps.
  16. Finally, select Install and wait until the process is completed.

Check your Internet Connection
Use Windows Update Troubleshooter
Manually Download and Install KB5030310
Reset the Windows Update Cache
For the time being disable third-party antivirus
Run SFC Scan and DISM Commands
Adjust Alternate and Preferred DNS Settings
Update Windows in a Clean Boot State
Execute an In-Place Upgrade

That’s all!!

Sharing is caring    Share Whatsapp

Topics:  Windows