Fix BUGCODE_USB3_DRIVER Blue Screen Error / BSOD in Windows 10

How to Fix BUGCODE_USB3_DRIVER Blue screen error or BSOD in Windows 10 having bugcheck value 0x00000144.

BUGCODE_USB3_DRIVER

Blue Screen Of Death or BSODs emerges in a computer after the Operating System detects a very complex drawback in Windows which is mostly irrecoverable. The system shuts down and restarts itself as to avoid the necessary data from permanent damage. Often the vulnerability resembles as Stop error or simply a system crash which the device will encounter after being unable to repair automatically. BUGCODE_USB3_DRIVER Blue sreen error in Windows 10 usually occurs when the USB driver crashes abnormally. The error doesn’t really crash the Operating system; instead it will force the USB host process to restart automatically. The error has a significant bug check code of 0x00000144 and it shows up on desktop after a USB device is connected to the computer or at the time of Windows initialization.

BUGCODE_USB3_DRIVER Blue Screen error is mostly caused when a USB device driver renders faulty operation. A Few invalid factors play roles like URB (USB Request Block) which has been derived to core stack or sending Close Static Streams URB in an invalid state. Stop error are usually complex in nature and they may often rooted from Windows feature update, incompatible software, stubborn hardware issues as well as buggy drivers. Though such errors are generally much destructive for the system, we have pointed out quality fixes to resolve it. Follow the below write up to ensure your system is free from Blue Screen Error.

Methods list

1] Disable Automatic Restart
2] Update the BIOS Firmware
3] Boot the device in Safe Mode
4] Re-adjust the Power Settings of Computer
5] Update the Driver Software
6] Run the default Blue Screen troubleshooter
7] Update the Operating System
8] Run SFC scan to recover system components
9] Keep the System free from Malware
10] Check the Hard Disk for bad areas and fix them
11] Remove unnecessary programs mostly the duplicate ones
12] Use USB 2.0 while installing Windows 10
13] Run the DISM tool and fix corrupted Windows image files
14] Disable the Fast Startup method
15] Reset Windows 10

 

BUGCODE_USB3_DRIVER Blue Screen Error in Windows 10

Here is how to Fix BUGCODE_USB3_DRIVER Blue Screen Error in Windows 10 –

1] Disable Automatic Restart

Blue Screen error is a critical failure of the system which forces the Windows to crash abnormally and it stops working immediately. Windows can carry out is to restart the device which often causes huge loss of data as most programs don’t have a chance to save their open components. In the case of BUGCODE_USB3_DRIVER BSOD, automatic restarting may not be common depending upon devices. But when it starts doing that, you cannot deploy any of the workarounds. Therefore, disable this feature if you face before it gets too late using the below steps –

  1. First of all, save all the ongoing tasks and close them if possible.
  2. Head over to Desktop area by pressing Win+D at once.
  3. When in the place, do a right-click on This PC icon.
  4. Select Properties option from context menu.
  5. From the succeeding window, click the Advanced system settings located at the left pane.
  6. After the System Properties Window unrolls, enter into the Advanced tab.
  7. Move out for Startup and Recovery area and click the Settings option.
  8. Wait for another wizard to show up, and reach the System failure area.
  9. Scroll down and clear off the tick mark from box that reads “Automatically restart”.
  10. Lastly, select the Ok button at the bottom in order to save these changes.
Automatic restart check box in Startup and recovery Window

Carrying out the above steps will disable the Automatic Restarting of Windows and the changes will put into immediate effect. As the system is ready, check out the below resolution processes listed.

Now, let’s try deploying these workarounds one after another until the BUGCODE_USB3_DRIVER Blue Screen Error resolves.

2] Update the BIOS Firmware

BIOS is the the abbreviation of Basic Input/Output System and it’s a ROM chip located on Motherboards. The firmware is an integral part of the computer that comes pre-installed with the OS and it allows you to access moreover set up the commuter from the most basic level. It’s a part of Microprocessor which will energize the system when you turn it On for the first time. Furthermore, BIOS is intended to control the data flow among the Windows 10 and adjoining accessories such as video device, keyboard, mouse, printer, hard drive, etc. It’s a volatile Firmware where any settings are restorable even the BIOS is removed from the device.

BIOS has access to Microprocessor on EPROM aka Erasable Programmable Read-Only Memory. When a device starts for the first time, CPU passes control to BIOS program which stays at the same place on EPROM. Outdated BIOS throws many of the complications, one of which may be BUGCODE_USB3_DRIVER Blue Screen Error. You must keep the firmware updated always in order to keep the system away from unwanted trouble, bugs & issues. Here are the steps to update the BIOS Firmware –

  1. Open the Taskbar search clicking magnifying icon from Taskbar.
  2. In the blank text box, type “System” followed by choosing System Information app from results.
  3. In the newly opened window, move out for BIOS Version/Date on the right side panel.
  4. Note the information written against this category and preserve it for next use.
  5. Leave the System Information window and open any web browser.
  6. Use the previously noted information regarding BIOS and visit it’s maker’s web page.
  7. Download the latest BIOS file complying with the specification from here.
  8. Run the downloaded file to install the latest version of BIOS.

3] Boot the device in Safe Mode

Booting in the Safe Mode is an outstanding Troubleshooting utility that starts the computer with a minimal set of drivers and services. It narrows down the programs in computer and allows only the essential ones to start up while booting. Safe Mode has a main intend to fix most of the problems evolving in the system within the periphery. Devices affected by malware, buggy drivers, and crashing frequently, need to restart in the safe mode for solutions.

When you will boot Windows 10 Into Safe, none of the third party software or driver will be loaded except the built-in and fundamental ones in a limited number. There are two kinds of this Startup method i.e. Safe Mode and Safe Mode with Networking. The second one allows the system to boot with network drivers and services aiming to enable the internet facility. So you need to try booting Windows 10 in safe mode to resolve the BUGCODE_USB3_DRIVER Blue Screen Error. If the issues don’t fix, we can focus on the third party options from next. Here is how to proceed –

  1. In the beginning, save all the processes you are working on so that no data is lost.
  2. Press the Win+D hotkeys at once in order to load the Desktop area directly.
  3. Now, press the combination of keys Alt and f4 together.
  4. Choose Restart option clicking the dropdown menu located under What do you want the computer to do?
  5. After the computer completes the first cycle of restarting, you will see a blue screen holding a few options.
  6. Click Troubleshoot from the menu.
  7. After a new context menu appears, choose Advanced Options and then Startup Settings in the process.
  8. Head over to the right bottom corner of this page and click the Power cog.
  9. Select the Restart option and let the computer reboot for the second time.
  10. When a new session starts, a new menu will open up with options to boot the computer in Safe Mode.
  11. Choose Boot in Safe Mode to enter into it

4] Re-adjust the Power Settings of Computer

Adjusting Power Settings can be a great idea to fix the BUGCODE_USB3_DRIVER Blue Screen Error in Windows 10. Nevertheless the workaround seems pretty unusual to most of the BSODs, this one is really helpful for USB related issues. Inappropriate Power distribution is harmful and you can disable the USB selective suspend setting in order to fix the blue screen error. Follow the below instructions to tweak the settings –

  1. Open the Windows Settings app pressing Win+I hotkeys at once.
  2. Click System tile when the UI loads fully.
  3. From the following settings page, click Power & sleep settings located at the left pane.
  4. Jump to adjacent pane on the right and click the ‘Additional power settings’ under Related settings area.
  5. In a few seconds, “Power Options” will open up from Control Panel and you need to click Choose when to turn off the display from left side.
  6. From succeeding window, click Change advanced power settings link.
  7. When a new popup opens, move out for USB settings.
  8. Click to expand the category and split up options for USB selective suspend setting.
  9. Click the options beside On battery and Plugged in and set to Disabled.
  10. Finally click Ok button and save the changes.
Fix BUGCODE_USB3_DRIVER Blue Screen Error BSOD in Windows 10

5] Update the Driver Software

Driver is Software responsible for communication as well as interaction between Windows 10 and outbound devices. Each function in computer needs a driver and in a few cases, it is more than one. When drivers are outdated in a system, it will be unstable, less efficient, and sluggish. In many cases, users may experience Hardware issues along with unusual Blue Screen Errors.

Updating all the drivers may work as a hotfix for BUGCODE_USB3_DRIVER Blue Screen Error as it has been one of the most successful workarounds over the past. You may think of a third party program in order to update them but nothing comes so efficient than the Device Manager. It’s a Windows built-in tool where outdated drivers are presented with identification marks. Follow the below steps now to update the drivers from your system –

  1. Invoke the Run dialog pressing Win and R hotkeys at the same time.
  2. Fill up the empty text space with “devmgmt.msc”.
  3. Press Enter key and let the Windows Device Manager open.
  4. Look carefully for any mark of exclamation beside a device in this console.
  5. If found, expand its devices’ list by double clicking the same.
  6. Right click the driver with yellow indication.
  7. Select Update Driver option from the appearing menu.
  8. When the popup shows, click Search automatically for updated driver software option.
  9. The process will commence if the device has got an active internet connection.
  10. When the downloading finishes, installation will take place automatically.
  11. Complete the same procedure for all outdated drivers.
  12. Finally, restart the computer for bringing these changes into effect.

See – Tips to Update Driver Software on Windows 10 Step by Step

6] Run the default Blue Screen troubleshooter

Troubleshooting Blue Screen was never been an easy task for us even after trying a bunch of workarounds. Microsoft dealt with the issue devotedly and came up with a massive fix for the BSOD. You need to run the troubleshooter in order to fix BUGCODE_USB3_DRIVER Blue Screen Error now. Here are the instructions to follow –

Using Direct Online Tool:

  1. Launch any web browser from your windows.
  2. Click this link and make a Visit to the webpage dedicated to Microsoft’s online troubleshooting.
  3. When new page loads completely, scroll down to When did you get the error? area.
  4. Click one of the radio buttons from here.
  5. When the page unrolls the walkthrough tasks to resolve existing issue, follow them and fix the Blue Screen issue.

Another prominent way to run the troubleshooter is from Control Panel. For that, check out the below steps –

  1. Press Windows key and type Control Panel.
  2. Choose the app to open in a separate window.
  3. Re-adjust the page by clicking Small/Large icons beside View by.
  4. Now, click Troubleshooting from first column.
  5. Moving to the next window, choose View all option located at the left pane.
  6. When the subsequent page unfolds, make a double click the Blue Screen option from second place.
  7. From the Troubleshooter wizard appearing next tap Advanced link from the left bottom end.
  8. In the upcoming page, put tick mark on the little box before Apply repairs automatically
  9. Hit the Next button to initiate the process.
  10. Upon finishing the troubleshooting, the utility will present guidelines to resolve Blue Screen if detected.

7] Update Windows 10

Blue Screen error is a versatile drawback having mystery about the root cause of its origin. In this case, Windows Update is one of the most successful ways to resolve the error as during the process, many of the potential bugs from earlier builds leave the system. Again, the update files released by Microsoft in a frequent interval always come up in a package form of security patches, pragmatic features, and the fixes for bugs. The complete process includes driver updating as well which you can avoid if you have already carried out the task.

Windows Updating Process is automatic; the device will commence downloading the new files if it is connected to internet. If that doesn’t happen, you can still progress manually to carry out this task and try fixing BUGCODE_USB3_DRIVER Blue Screen Error. The steps to follow are these –

  1. Open the Start menu pressing Windows key and click the cog.sign.
  2. When Windows Settings app opens up, click the Update & Security tile.
  3. From the next page, click on Windows Update located at the left pane.
  4. Shift to alongside right and click on Check for updates link.
  5. Upon searching, the update patches will be downloaded.
  6. Click Install now after finishing the downloading.
check for updates button on Windows update

8] Run SFC scan to recover system components

Each file in a system has a definite structure and specific contents which are operated normally when all the information stays in the right place. When the file is corrupted, the written information in it will be in wrong place and it will not open normally. System Files possess similar character and with them, Windows cannot operate in usual mode.  Hence, plenty of vulnerabilities show up one of which is BUGCODE_USB3_DRIVER Blue Screen Error.

System Files in Windows may be corrupted because of sudden power surge, full system crash, updating faults, malware infection, “power outage”, and mismatched version. Corrupted System files will not open at all and appear as unreadable. To fix the Blue Screen error, you need to make these files normal and for that, System File Checker is the only tool. The utility opens only in the Elevated Command Prompt executing a specific command. Here are the guidelines to use this utility –

  1. Open up Power user menu pressing Win and X hotkeys in combination.
  2. Choose Run from the list and invoke wizard.
  3. Type “cmd.exe” in the provided text box provided of it.
  4. Now press Ctrl + Shift + Enter keys at one time.
  5. Click Yes when the User Account Control floats up for asking permission.
  6. In the Elevated Command Prompt window, enter the below text at the base of blinking cursor –

Sfc/ Scannow

system file checker in elevated command prompt
  1. Press the Enter key to activate System file checker.
  2. The default tool will start looking for corrupted and missing system components in the device.
  3. It will also resolve the dreadful system files automatically.
  4. Reboot the Windows once done.

9] Keep the System free from Malware

Malware is the worst enemy till today over internet and these bugs are always at a lookout for some weak areas in your security system. They are no dissimilar to a usual file and stays in disguise in various links throughout the web. They disperse swiftly using media like USB drives, spam e-mails even in some webpages. The primary intention to create malware is simply to hack personal information about user. Coming across malware is very frequent, to be honest especially while surfing over the web. To keep the system out of risk, you need to strengthen our security shield so that, these bugs fail to get through.

Once they manage to get access, the viruses will damage the system files apart from stealing sensitive data. We have already mentioned earlier that, corrupted or damaged system file can cause BUGCODE_USB3_DRIVER Blue Screen Error very easily. Windows Security is the latest inclusion in Microsoft’s shield mechanism replacing any third-party anti-virus program. This is a default program and provides real-time protection against Trojans, Spywares, and any kind of malware. Use the tool to clean up virus from your system using the below instructions –

  1. Open the Taskbar Search pressing Win+Q hotkeys.
  2. Type Windows Security in the blank text field and press Enter.
  3. When the app opens up, Choose Virus & threat protection from the left pane
  4. Shift to alongside pane and make a click on Scan options link.
  5. When all methods are visible here; click radio button set for Full scan option.
  6. Hit Scan now button and begin malware search in the system.
  7. If the utility trace out some bugs, you will see the list on display. Click the Clean Threat option to get rid of them.
  8. Once moved to the succeeding page, click Remove followed by tapping Start actions to clean up all the threats.

10] Check the Hard Disk for bad areas and fix them

Hard Drive, sometimes, has Bad areas which consist of small clusters or sectors that appear as faulty. It may happen in both magnetic hard drivers used traditionally or in modern solid state ones as well. There are two types of bad sectors that may exist in hard drives viz hard and soft alternatively physical and logical. Physical hard drive bad areas formed when the device is actually damaged or from a production fault. The soft bad areas of the logical one are bit software oriented. It may happen due to sudden power shut off, forcibly pulling power cable or even some malware issues creating mess.

Bad areas in the hard disk are very much likely to cause a BUGCODE_USB3_DRIVER Blue Screen Error very easily. To fix these areas, Disk Checking tool is the best utility and it’s a default tool from Microsoft. This is a powerful freeware tool intended for detecting as well as repairing the disk errors. Here is how to run the tool –

  1. Open the Start menu and click the Power icon.
  2. Select Restart option holding the Shift button and let’s carry out Automatic Repair.
  3. When the device powers up, click Troubleshoot from available context menu.
  4. Choose Advanced Options next followed by tapping Command Prompt from the list.
  5. In the following black window, enter below commands at the base of blinking cursor –

bootrec.exe /rebuildbcd

  1. Press Enter key and then proceed for executing below commands –

bootrec.exe /fixmbr

bootrec.exe /fixboot

  1. Press Enter key after entering each command to execute them.
  2. Lastly, enter the below command

chkdsk C: /f /r /x

  1. Press Enter key to run the Disk Checking tool in the system.
  2. Once done, Restart Windows 10 and make all changes effective.

11] Remove unnecessary programs mostly the duplicate ones

Software programs reduce human efforts while doing computer tasks and also save time. Therefore, plenty of applications get approval and enter into the store every day where many come with a different name but same functionality. While installing the applications we need to keep in mind that, disk space reduces when you install a large number of them unnecessarily.

When similar types of programs are installed in the same system, they may engage in conflict leading to clear off some system files. As soon as the system files and DLL components go missing, BUGCODE_USB3_DRIVER Blue Screen Error evolves in Windows 10. Therefore, you need to remove some of the duplicate or unnecessary programs using below steps –

  1. Open up Power user menu pressing Win+X hotkeys at once.
  2. Choose Apps and Features option listed.
  3. When the App Settings will open up, move to the right side pane.
  4. Find out the application causing trouble and click the same.
  5. Select Uninstall option from the extended pane.
  6. For confirmation of the task, click Uninstall button.
  7. Follow the few more guidelines available on display to complete the process.
  8. We recommend restarting the device once to make the changes into effect.

12] Use USB 2.0 while installing Windows 10

BUGCODE_USB3_DRIVER Blue Screen Error may also evolve in the Operating system after installing the Windows 10. The reason is not quite sure but Windows 10 may have some conflicts with USB 3.0 ports. Hence while installing the Windows 10 freshly using a Flash drive, try using USB 2.0 ports in order to avoid any further issues. There is another way out, you can simply use a DVD while installing and the error may not appear in the system.

13] Run the DISM tool and fix corrupted Windows image files

Windows image files are released by Microsoft before any major release and these are the snapshots of layout of a CD/DVD saved in the drive in ISO-9660 format. The main use of these files to write a blank CD-R or DVD-R in order to make an identical copy of files. Often these files are found in corrupted condition due to third party applications or corruption in the windows components. The ultimate result comes up, for this reason,BUGCODE_USB3_DRIVER Blue Screen Error appears.

If you like to fix the BSOD error caused by image files, you need to run the DISM command in the Elevated Command Prompt. Deployment Image Servicing and Management tool can capture, manage, or split the .wim files. To complete the process, follow the below steps –

  1. Open the Taskbar Search and type cmd in the blank test area.
  2. Right click the Command Prompt and choose Run as Administrator.
  3. Tap Yes when UAC prompts for permission.
  4. When the black window arrives, type the below command at the blinking cursor –

DISM.exe /Online /Cleanup-image /Restorehealth

  1. Activate the tool pressing Enter key.
  2. As the process will search through the components in the system, and try detecting the defective image files, it may take longer than usual.
  3. When finished fixing, restart Windows 10 to make these changes effective.

14] Disable the Fast Startup method

Fast Startup initiates rapid booting of new startup collecting information from a previous session. It’s a combined feature of computer’s two traditional power options – Shut down and hibernate. The feature when enabled restricts the computer from getting a usual shutting down process. Furthermore, it can cause some compatibility setbacks with the devices that don’t support the Sleep or Hibernation mode.

Since the feature usually collects information from an ongoing Windows session to load the startup faster, it may also keep Blue Screen error intact from the last session. Often times the BSOD errors are less destructive and resolve only after rebooting the computer. In that case, keeping Fast Startup enabled will be detrimental for BUGCODE_USB3_DRIVER Blue Screen Error. Therefore, let’s proceed to disable it using the below steps –

  1. Move the cursor to the right corner of Taskbar and right click the Battery icon.
  2. Select Power Options from the available context.
  3. After a new window unfolds, choose What the power buttons do link from the left pane.
  4. From the subsequent window, Click on Change settings that are currently unavailable to unveil the hidden options.
  5. Scroll down and uncheck box says Turn on fast startup (recommended).
  6. Lastly click the Save Changes button from the bottom.

15] Reset Windows 10 to fix BUGCODE_USB3_DRIVER Blue Screen Error

Resetting Windows 10 is pretty similar to a Clean installation of Operating System. If a BUGCODE_USB3_DRIVER Blue Screen Error is caused by a third party program and very much unlikely to resolve, you have to go for resetting Windows 10. The feature offers you to remove all files from drive C: or keep the files if you like so.

With a decision to remove all files from system, you need to keep a backup of the components before carrying out the task. Another very important tool here is a bootable flash drive or USB with the latest version Windows 10. The process is as follows –

  1. Open the Start menu and click Power sign from there.
  2. Select Restart option while holding the Shift button from keyboard.
  3. When the Windows Will boot up at Automatic Repair, select Troubleshoot option.
  4. From the next screen, choose Reset this PC > Remove everything.
  5. When you will be asked to insert the bootable installation media, do this.
  6. Choose options Only the drive where Windows is installed > Just remove my files in the process.
  7. Lastly, click Reset to begin the process.
  8. Complete the process by following on-screen instructions appearing next.

Follow the instructions here – How to Reformat Windows 10.

When the process ends, skip installing any drivers or programs and straightway check if the error has resolved. When the process comes out successfully, set up the windows as you require to make it work worthy.

That’s all!!!

   
 
 

Leave a Reply

Your email address will not be published. Required fields are marked *