Fix: Machine Check Exception Blue Screen of Death Error in Windows 10

19 ways to solve Machine Check Exception Blue Screen Error or BSOD having bugcheck value 0x0000009C in Windows 10.

Machine Check Exception

Did your Windows 10 desktop unexpectedly stop working and reboot automatically displaying Machine Check Exception error on Blue screen? The issue is pretty annoying stop error having bugcheck value 0x0000009C. Most commonly faulty and outdated device drivers come out to cause this BSOD.

Missing system resources, DLL files due to malware infection, corruption, a conflict between two similar apps also create the issue. From hard disk side, presence of bad areas in it, low space due to junk accumulation, incorrect allocation of memory, using hardware devices can cause Machine_Check_Exception. With all these factors playing together, it’s been tough to recover a device from BSOD error. Therefore, today we will discuss some effective workarounds which can potentially resolve the issue.Following is the list of solutions you will come across –

Machine Check Exception BSOD Error in Windows 10 Solutions

Here is how to Fix Machine Check Exception BSOD Error in Windows 10 –

1: Prevent Windows from Restarting Automatically

First thing first, as the Windows prompt to reboot time and again that too without any definite reason and notice, we need to disable the feature first. This is the most annoying thing you will have once the device is diagnosed with Machine Check Exception BSOD Error in Windows 10. After disabling, there will be ample opportunity to deploy other resolutions without any hustle. Let’s see the process below –

First of all, save and close if you are running an ongoing process. You can also minimize temporarily.

Step-1: Hit a combined press of Win+D at once to shift in the desktop area directly.

Step-2: On the Desktop, do a right click on the This PC icon and select Properties option.

Step-3: System window will come up immediately.

Step-4: Move ahead and select “Advanced system settings” from the left pane.

Step-5: Once a new popup shows up with System Properties, enter into the Advanced tab.

Step-6: Move little down and select Settings located under the Startup and Recovery section.

Step-7: After the new wizard comes in the display, roll down to System failure and uncheck the box before Automatically restart option.

Fix Machine Check Exception Blue Screen of Death Error in Windows 10 image 1

Step-6: Hit the OK button from the bottom to proceed ahead.

When these changes are saved, it will not prompt to reboot unconditionally. Meanwhile, you can apply the other workarounds in an easy manner.

2: Apply the Default Windows Blue Screen Troubleshooter

With BSOD errors being prevalent in a good number of devices using Windows 10, Microsoft thought out of the box. An outcome is a default tool named Windows Blue Screen Troubleshooter. Users having Fall Creators Update version or above that will have this handy utility in Settings app Under Troubleshooting. Upon deployment, you can leave all the rest on the built-in tool since it will potentially resolve the Stop Error issue. Here is how to apply the tool –

  • Make a press of Windows key and select the Gear-shaped icon.
  • When the app is loaded fully, move on to Update & Security section and eventually perform a click on it.
  • From succeeding page, select Troubleshoot subsection lying in the left pane and then jump to the corresponding right.
  • Here, move down to find Blue Screen option in the page and do a click on it once reached.
  • Hit Run the Troubleshooter button from the extended pane once visible.

Now, the tool will start detecting Stop error in the system and fix automatically once discovered. In the end, you can recover the device from the grasp of Machine Check Exception BSOD Error in Windows 10.

3: Update all the Device Drivers Now

Stop Errors like Machine Check Exception BSOD is excited due to having old, defective and outdated device drivers in the system. Logically, there should not be such a vulnerable driver in the system in any condition. However, Windows Device Manager makes the task whole easier a lot. You can see those problematic drivers in yellow indication and thus update them in a single tap. See the process in the below steps –

  • Hover the pointer to Start menu and do a right click on it.
  • When the menu appears, select Run and let the dialog box appears.
  • In the text area given here, type devmgmt.msc and hit the Ok button located beneath the box.
  • When Device Manager is upfront, look closely in the console. Expand the device where you will see a mark of exclamation.
  • Upon expansion, perform a right click on the driver and from the appearing menu, select Update driver option and let the process begin.
Fix Machine Check Exception Blue Screen of Death Error in Windows 10 image 2
  • After the process ends following the onscreen guidelines, you will probably resolve existing BSOD error from the system.

4: Boot Windows 10 in Safe Mode

For resolving BSOD error like Machine Check Exception, Booting the system in Safe Mode comes at the top of your priority. This is also considered as the most common fix in respect of the issue. Upon application of this resolution, the device will load only the basic programs and error should resolve afterward. To Boot the device in Safe Mode, guidelines are as following –

  • Make a right-click on the Start and choose Settings from the list appears there.
  • When shifted to the Settings app, select Update & Security and load its additional page on next.
  • When the consequent page opens up, choose the Recovery subsection lying the left overlay.
  • Move to the adjacent right, find out Advanced startup and click Restart now button.
  • After Windows completes the first cycle of rebooting, it will ask you to select the next step. Choose Troubleshoot from appearing screen.
  • Moving ahead, make a click on Advanced options and then hit Startup Settings.
  • Once the OS informs you that the device can be restarted with the use of additional settings, select Restart to move ahead.
  • After signing back on completing restarting the second time, Press f4 in order to Boot into Safe Mode.

5: Update Windows 10 by installing pending patches

Since cumulative updates contain fixes for bugs and problems always, never wander there might be something that can potentially remove Machine Check Exception BSOD. We often keep these items pending due to lack of time and suitable opportunity. An outdated OS is prone to get affected easily as well. Therefore, we will now try to update the OD first installing those cumulative updates. To get them in System, the procedure is as follows –

Important- Before starting the procedure, make sure there is an active Internet connection preferably a high speed one. Try using from Ethernet cable or Wi-Fi. If you want to use the Mobile Data, ensure disabling of Metered connection first, otherwise, Downloading will not begin.

  • Manage entrance to the Setting app first using any of the above guidelines.
  • From the app UI, move for Update & Security and in the end, perform a click on the tile.
  • When the next page loads, go to Windows Update located at the left wing and jump on the alternate pane.
  • On the right, never bother the “You’re up to date” dialogue and perform a click on Check for updates button.
Fix Machine Check Exception Blue Screen of Death Error in Windows 10 image 3
  • Upon completing the searching, patches will be visible here in the page ad you need to select the Download button under each.
  • Once the Downloading ends, the installation will occur automatically.
  • Restart the device when required until the process finally ends.

6: Try diminishing all Malware in Windows Security

Virus components are living on the web everywhere and they are huge in number. They have a versatile way of causing vulnerabilities also. When these get entrance to the system after making a visit to a suspicious website or clicking a link in Spam mail, they play with system resources. In the process, these files deteriorate and call in Machine Check Exception BSOD. To stop this, we need to launch Windows Security which is a default anti-malware for the OS and dismiss them. Here is the process below –

  • Move the pointer to the bottom right corner of Taskbar and eventually hit a click on Show hidden icons arrow located there.
  • Upon opening the menu, choose the Shield icon and let the Windows Security app shows up on the PC screen.
  • Once the app unrolls, select the Virus & threat protection subsection lying in the left-hand side.
  • Switch to the right pane and make a click on the link saying Scan options.
  • Once all the method shows up, select Full scan radio button followed by a hitting a click on the Scan now.
Full Scan Windows Defender to fix BSOD
  • Windows Security will now start detecting for any virus component in the system. Once the scan gets over, the result will be displayed on the screen. If there are any traces of malware, do a click on Clean threats button to get rid of them from the system.
  • On the following page, the app will offer you three actions for the threat. Choose Remove initially and then click on Start actions to initiate removal.

7: Update the BIOS of your System

BIOS is one of the most sensitive components in the PC. Though it is being a software component, many hardware items are entirely dependent on this. Users need to be more cautious whiling making any modification in it. Outdated BIOS might also be a cause of Machine Check Exception BSOD quite often therefore, we will now update the BIOS in below steps –

Step#1: Roll the cursor to Start menu and eventually perform a right click on it.

Step#2: Once the options appear, choose Run.

Step#3: Prior to opening the dialog, type msinfo32 in the blank search box.

Step#4: Hit Enter key and you will see System Information page.

Step#5: When you will find an empty text area in the user interface, type “BIOS Version” and also press Enter key from the keyboard.

BIOS Version and date to solve blue screen

Step#6: You will see both of the Developer as well as the Version of BIOS installed in the PC.

Step#7: Now, Leave that information page and open any web browser.

Step#8: Visit the manufacturer website for BIOS using the information you have got before.

Step#9: In due course, initiate the Downloading of the latest version from that page. In case of using a Laptop, ensure the Charger is plugged in until installation finishes completely.

Step#10: Make a double click on the file and install this latest version in Windows.

Step#11: After finishing the process successfully, Restart the device and make these changes effective.

8: Disable CSM and Fast Boot and Intel SpeedStep Technology in BIOS

People from various corners have gone through the critical face of Machine Check Exception BSOD Error due to having CSM and Fast Boot and Intel SpeedStep Technology enabled in BIOS. Fortunately, the solution was simple as well. Only disabling these cured the device. We can try this workaround also. To access the BIOS as well as Disable features from it, the best way to check the Manufacturer manual. There will be guidelines following which you can accomplish the task easily.

9: Disable the LAN adapter to fix Machine Check Exception

From the reports received, this is evident that Machine Check Exception BSOD Error in Windows 10 might be a cause of your Atheros network adapter. For resolving the issue in the device try disabling this Network adaptor you are having. To disable, the guidelines are as follows-

  • Open the Run dialog box by pressing “Win+R” keys together.
  • Type devmgmt.msc in the provided text space in it and eventually hit b.
  • When the Device Manager is upfront on display, proceed to Network adapters in the device console.
  • Once found, expand the device and do a right click on the adapter you are using and select Disable device option from the visible menu.
  • Follow the on-screen guidelines until it disables fully.
  • Once done, restart the computer and then sign back in again, check if there is an issue present in the system.
  • If resolve the Machine Check Exception BSOD Error, try downloading the disabled network adapter and install it.

10: Give the External Hard Disk, DVD Drive a break and plug in again

Some people have discovered Machine Check Exception BSOD Error in Windows 10 after started using of a DVD driver or additional Hard Disk in the system. The resolution is rather simple. As the feedback evident, only disconnecting them for a while fixes the issue. Let’s follow the below guidelines and offer these items a momentarily break –

  • First of all, dis-joint the external Hard drive as well as DVD drive from the computer.
  • Keep them in an accessible and safe location.
  • Moving ahead, Restart Windows 10 PC.
  • Upon accomplishing the process, while sign back in, do a check for Machine Check Exception BSOD Error in Windows 10.
  • If the issue resolves properly, plug the devices back in.
  • Launch any web browser and do a visit to their maker’s website.
  • Thereafter, download and install the updated drivers for web page and use them smoothly.

11: Fix up RAM issues and Memory allocation

Bad areas in the RAM and presence of incorrect allocating Memory will invite the Machine Check Exception BSOD Error in Windows 10. Therefore, we have to concentrate on resolving the memory problems as well. Windows Memory Diagnostic is the handiest utility to deal with these cases. Here is how you should move on –

  • Do a conjoint pressing of Windows and S to invoke Taskbar Search.
  • When it unveils, type memory in the empty search box and also select Windows Memory Diagnostic to open.
  • On the following wizard, hit the “Restart now and check for problems (recommended)”. This will let the Windows to reboot normally.
Restart now and check for problems in Windows memory diagnostic
  • When sign back afterward, the tool will start looking for memory problems in the system. It will also fix up detected problems automatically. The progress rate will be indicated in percentage.
  • When it hits 100%, the device will again restart automatically.
  • After completing the cycle, when you return back to the desktop, the result will be available in the notification area of System Tray.

12: Recover Corrupted System Elements and missing DLL files

System resources get corrupted by so many means and DLL files also go missing sometimes. The ultimate outcome is a BSOD error in the system. To recover these files from corruption, System File Checker will be super handy. Being executed in the Elevated Command Prompt, this built-in utility can stand by your side to the problems. To proceed, follow the below guidelines –

  • Move the pointer down and perform a click on search logo residing at the extreme left of the taskbar.
  • Once the Taskbar Search shows up, type cmd.exe in the box provided here.
  • Do a right-click on Command Prompt when visible in the result. Choose Run as administrator.
  • After User Account Control prompts for permission, give authentication by selecting Yes.
  • Moving ahead to the elevated Command Prompt window, write the following code at the winking cursor-

sfc /scannow

  • Now, to execute its duty hit Enter.
  • The tool will thereafter start working and fixes system file corruption automatically.
  • Wait until the process gets over wait patiently.
  • Once the task finishes, restart the Windows to make these resolutions effective.
  • Upon returning back to the desktop, check if there is any BSOD error present in the system.

13: Uninstall Programs causing loss of Data after making Collision

If similar programs stay in the system, they often collide with one another and results in losing valuable data from OS. With lost files and resources, Machine Check Exception BSOD Error in Windows 10 rises up. Therefore, we need to remove these files from the system using the below instructions –

  • Hover the cursor to the left bottom end of the Taskbar and end up making a right click on Start menu.
  • When the dialog appears on the screen, type appwiz.cpl in the search box provided and hit Enter key.
  • After Programs and features window unrolls in the display, have a look in the list of installed apps.
  • Reach out to similar apps installed in the system causing Machine Check Exception BSOD Error.
  • Do a right click on each and select Uninstall option in due course.
  • Follow the next few tasks according to the instructions comes on display to delete it completely.

14: Throw out the problematic Windows Update patches

There is now such common records that autonomous Windows Updating process stops at the midway. It might happen seldom and cause BSOD error in the system. As a part of resolving the error, deleting those files only help. You can uninstall those patches using below guidelines –

  • Manage the access to Windows Settings app by pressing Win+I keys together.
  • When in the app area, reach to Update & Security region and eventually do a click on it.
  • Once the succeeding page loads fully, select Windows Update residing in the left pane.
  • Jumping on to the right side, hit a click on the link saying View update history once you come across.
  • From the consequent page prior to opening, select Uninstall updates link available here.
Uninstall updates in update & security settings
  • By default, a new window “Installed Updates” will float up from Control Panel.
  • Reach to the recently received patch in the appearing list and select it in the process.
  • Hit Uninstall option appearing at the top ribbon.
  • Keep following the tasks shown in desktop until these are deleted completely.

15: Free up space in the Disk by clearing junk files

Temporary execution files are termed as junk and they really come to no use afterward. These files keep on storing in the disk drive and occupy huge space in it once urns big in volume. As the disk runs in low space, problems like Machine Check Exception BSOD Error will make way out. To stop the deadly consequence, we need to free up space by cleaning junk using the Disk Cleanup tool. Here is how to use the utility –

  • Invoke the Run dialog by pressing “Win logo + R” hotkeys together.
  • In the box offered here, type cleanmgr and hit the Enter key as well.
  • When the small popup rolls out to select the preferable drive, hit C: by clicking on the dropdown menu and choose Ok from the dialog.
  • The Disk Cleanup utility will start calculating the amount of space it can recover from junk. Now, from the visible wizard, come down to bottom and hit the Clean up system files button.
Fix Machine Check Exception Blue Screen of Death Error in Windows 10
  • In due course, the small popup will float up again asking to select the drive. Choose C: again using the dropdown menu and press Enter key.
  • Now, in the Disk Cleanup for (C:) popup, reach out to Files to delete section and check all boxes except Downloads.
  • Hit the Ok button from the bottom of this wizard and let the cleanup begin.
  • This process might take a good amount of time, hold patience accordingly and let it get over normally.
  • When the process ends, reboot Windows and after signing back in, check if the error persists.

Note- Before clicking the Ok button from the bottom, make sure you have nothing left in Recycle Bin. If there is anything, restore them in respective locations.

16: Rectify Windows Image Files in the system

Windows Image Files are in case sensitive and often fall in discrepancy. Corrupted files like those can easily welcome Machine Check Exception BSOD Error in Windows 10. Therefore, we need immediate action against those. “Deployment Image Servicing and Management” in short DISM tool can effectively resolve these. You have to follow the below guidelines to use the tool –

  • Get the entrance to Elevated Command Prompt using the same guidelines shown above.
  • When in the dark window, type the following command at the place where a cursor is blinking-

DISM.exe /Online /Cleanup-image /Restorehealth

  • Deployment Image Servicing and Management (DISM) tool will power up after pressing Enter key.
  • The tool will rectify all the trouble Windows image files eventually.
  • This might be a lengthy one, but thoroughly helpful. So, do not terminate until it finishes normally.
  • Once ends, restart the device and when signing back in, perform a check for Machine Check Exception BSOD Error.

Hopefully, it will resolve the BSOD issue.

17: Perform System Restore to Load back previous State

Installing a program or uninstalling something keeps tweaking Windows Registry. Once something goes wrong in the process, Machine Check Exception BSOD makes its way out in the system. In a very simple way, you can resolve this and that is to move back in earlier point. System Restore allows you to jump back to an earlier state if have previously created points. If lack of those, move on to the next resolution sand continue resolving Stop error. If you have already such points, use below guidelines to perform system restore –

  • Press Windows Key and after Start Menu floats in, keep typing rstrui using the keyboard.
  • Select it from result to launch System Restore wizard.
  • Moving ahead to the wizard, hit Next to proceed.
  • On the succeeding page, select Show more restore points to preview all previous ones.
  • Choose the latest one from the list and again do a click on Next button.
  • Proceeding forward to the last page, hit the Finish button located at the bottom and start the restoring process.

18: Settle the Poor areas in the Hard Disk

Due to prolonged use, Hard Disk experiences poor areas in it. As a result of that, Machine Check Exception BSOD Error in Windows 10 rises up. Disk Checking tool can deal with these areas once executed in the Elevated Command Prompt. To launch the tool, move with the below guidelines –

  • Make a combined press of Ctrl + Alt + Del keys until a new page hits on display.
  • From appearing window, select Task Manager and open the app.
  • In the UI, do a click on File option located at the top left corner and also choose Run new task option.
  • A dialog will appear sharply and you need to fill up the blank field with “cmd” text.
  • Moving down, check the box ahead of “Create this task with administrative privileges”.
  • Lastly, hit the Enter key to enter in the Elevated Command Prompt directly.
  • When in the black window, type following command at the base of the blinking cursor. Hit Enter key and Disk Checking Utility will preview the disk status only.

Chkdsk

To fix the poor areas in the volume, we need to add a few more prefixes with the command. They are-

  • C: for the drive where the Windows 10 you have installed. In case of using other drives, use D:, E: or any.
  • f for fixing the detected areas found in the disk volume.
  • r for initiating the detecting process to find out bad areas inside of the Disk volume.
  • x for splitting up the resources to facilitate the detection process.

With all these characters, the final command looks like-

chkdsk C: /f /r /x

  • Once you press the Enter key typing the above command at the winking cursor, the Disk Checking Tool will now fix the poor areas automatically. This might be a lengthy process, hold the nerve until it finishes up completely.
  • After it ends, restart the device using the usual way. Prior to returning back, see if there is any Machine Check Exception BSOD Error present.

19: Delete Third party Anti-Virus Tool from Windows 10

People intended to use anti-malware programs quite a lot before Windows Security made its way out in the system. Often these applications are free and offer great deals to prevent malware. But, as there is the best anti-malware tool in Windows 10, there is no need for those tools anymore. Besides, using them can also be dangerous as they sometimes end up calling BSOD errors. Deleting those programs are easy if you follow the below instruction –

  • Press “Win logo+I” hotkeys and open Windows Settings app.
  • Proceed to Apps tile and perform a click on it.
  • From the next window, select Apps & features located at the left pane.
  • Jumping on the corresponding right side, reach out to third party Anti-Virus tool in the appearing list.
  • Select the same and hit Uninstall button once seen in the pane.
  • If UAC asks for permission, select Yes to proceed.
  • Follow the guidelines available on display to remove the tool completely.

By now, you have probably used all the workarounds and resolved Machine Check Exception BSOD Error in Windows 10. It’s obvious since the workarounds are super effective ones. In another way, if you cannot resolve the issue still, don’t be frustrated. We are presenting another perfect way as last resort, you can execute a clean installation of Windows 10. If done with utmost perfection, there shall not be any more issues evolving next.

After coming to a decision that you will do a clean installation, make sure to connect the device with the internet initially. Save a backup for all the necessary files and fetch them out of the device in USB or additional hard drive. In case of being nervous, seek help from skilled professionals to avoid hustles.

Methods:
1: Prevent Windows from Restarting Automatically
2: Apply the Default Windows Blue Screen Troubleshooter
3: Update all the Device Drivers
4: Boot Windows 10 in Safe mode
5: Update Windows 10 by installing pending patches
6: Try diminishing all Malware in Windows Security
7: Update the BIOS of your System
8: Disable CSM and Fast Boot and Intel SpeedStep Technology in BIOS
9: Disable the LAN adapter to fix Machine Check Exception
10: Give the External Hard Disk, DVD Drive a break and plug in again
11: Fix up RAM issues and Memory allocation
12: Recover Corrupted System Elements and missing DLL files
13: Uninstall Programs causing loss of Data after making Collision
14: Throw out the problematic Windows Update patches
15: Free up space in the Disk by clearing junk files
16: Rectify Windows Image Files in the system
17: Perform System Restore to Load back previous State
18: Settle the Poor areas in the Hard Disk
19: Delete Third party Anti-Virus Tool from Windows 10

That’s all!!

Sharing is caring    Share Whatsapp

 
Topics:  Windows
  
About Nipu
Windows 11, 10 Tweaker, and Tech Enthusiast.