Fix INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10

How to Fix INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10.

INVALID_RUNDOWN_PROTECTION_FLAGS

A complete system crash because of various problems occurring from both software as well as hardware sides generates Blue Screen error. The in Windows issue is usually a very severe fatality in the system and almost irrecoverable as many cases are so evident. INVALID_RUNDOWN_PROTECTION_FLAGS in Windows 10 is such a critical problem and it’s a BSOD error. Once occurred, the issue will throw continuous abnormal messages and system reboots leaving no scope of doing anything. Error messages contain specific bug check codes and the error name from where you can only get an idea about the problem. For the mentioned one, the bug code is 0x0000016C confirming the flags supplied to one of the rundown protection APIs were invalid.

In most cases, the blue screen error like INVALID RUNDOWN PROTECTION FLAGS doesn’t confirm the causes and that makes the troubleshooting really difficult. From a generalized thought, these sorts of issues are mainly caused by driver issues such as outdated or after getting a defective update. Some other causes like corrupted system files, outdated BIOS and Windows OS, defective windows image files, and memory issues will generate the BSOD error. From the hardware side, bad areas in the external or magnetic hard disk, using some USB peripherals and bad RAM stick might be detrimental and cause the same blue screen issue. Nevertheless, the error being so critical and irrecoverable mostly, some usual tricks worked to resolve it. We will discuss the effective workarounds in the following segments, follow the quick links from the Method list and try them until the issue gets resolved.

Methods list

1] Turn Off Automatic Restart of Windows
2] Install all available patches to update Windows 10
3] Diagnose the memory problems and fix accordingly
4] Disable Fast Boot mode
5] Perform System Restore and roll back previous point of Windows
6] Update all the drivers in Windows
7] Uninstall a defective device driver or Roll back it to default
8] Run the Windows Blue Screen troubleshooter
9] Clean junk files from disk drive and make space in it
10] Make the BIOS up to date
11] Run the Windows security to clean all malware threats:
12] Uninstall non-essential applications
13] Execute sfc/ scannow command and fix corrupted system components
14] Boot Windows 10 in Safe Mode with Networking
15] Repair bad sectors in the hard disk
16] Boot Windows 10 in Safe Mode with Networking
17] Fix the corrupted Windows image files
18] Repair Hardware problems and dis-engage some peripherals

 

INVALID_RUNDOWN_PROTECTION_FLAGS

Here is how to fix INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10 –

1] Turn Off Automatic Restart of Windows

A complete system crash rendered by blue screen error forces the system to lose some very important resources. Windows after sensing the trouble opts to shut down the system without leaving any chance to perform further tasks. Therefore, the entire system loses workability and becomes unstable as of carrying out frequent unwanted restarting. Automatic Restarting is a built-in feature in Windows and it’s a safety measure to protect internal components from damage. System keeps it enabled by default but you can override the settings to disable and restrict the device from restarting automatically.

Disabling the Automatic Restating won’t resolve the INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10 at all. This will help you create a well stable environment to deploy the workarounds and resolve the BSOD error. To accomplish the task, follow the below steps –

  1. Save the unfinished tasks you were doing and close them in order to avoid any unexpected data loss.
  2. Proceed to the Desktop area pressing Win+D hotkeys together.
  3. Right-click This PC icon from Desktop and select Properties option.
  4. From the newly opened window, click Advanced system settings link located at the left pane.
  5. When the System Properties window shows up, enter into the Advanced tab.
  6. Hover down to the Startup and Recovery area and click the Settings button.
  7. In the next popup, reach to System failure area and remove the checkmark from the box that reads “Automatically restart”.
  8. In the end, click the Ok button at the bottom and save these changes.

Changes will be effective immediately and the computer will no more restart automatically from now on. Hence, the system will gain workability as well as will be ready to deploy below workarounds.

2] Install all available patches to update Windows 10

Windows Operating System needs regular updating and for that, regular patches are released by Microsoft. These update files are the complete package of recent modification, security improvements, the inclusion of new tool as well as bug fixes. if you install these patches, the system will be strengthened to block most of the critical bugs and will stay out of trouble. As the blue screen error doesn’t show the appropriate cause, troubleshooting becomes really tough so as the resolutions. Many people have found a simple trick like installing all the patches resolves the INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10.

In the latest version of Windows 10, the updating process is usually autonomous and the system will start downloading as well as installing patches immediately after being available for your device. Often that may not happen since Microsoft delays to process the task or unavailability of internet connection. Hence, you need to keep an eye always in the Windows Update Settings and install them manually. If you don’t know how to proceed, follow the below guidelines –

  1. Press Windows key and I at once to avail the settings app.
  2. From the displayed UI, click the Update & Security tile.
  3. When the succeeding page is loaded, select Windows Update lying at the left pane.
  4. Move straight to the corresponding right side and click on Check for updates link.
check for updates to fix blue screen error
  1. Click Download button once all the patches are available.
  2. Upon finishing the downloading, the installation will commence automatically.
  3. Follow the further instructions provided on screen to complete the process.

See – Windows 10 Cumulative Updates.

3] Diagnose the memory problems and fix accordingly

Windows often experience memory problems due to low space in the disk, critical issues in the memory as well as from bad RAM. These problems are pretty much likely to generate the INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10. When a BSOD error renders an abnormal message of the display, you may not know exactly where the issue has come up. Therefore diagnosis is necessary before proceeding to any major task like replacing the entire memory unit or buying a new RAM stick. After performing the previous workarounds if you have failed to fix the stop error code, we suggest you run a diagnosis for memory problems on the computer.

Windows Memory Diagnostic tool is a default utility in the operating system that carries out diagnosis for detecting the problems in the memory and notifies you upon completing the process. If you see any problem in the report, can take necessary actions accordingly and fix the blue screen error. Here are the guidelines to run Windows Memory diagnostic –

  1. Bring forth Run dialog pressing Win+R hotkeys at once.
  2. Type mdsched.exe in the given search box.
  3. Click Ok button provided on the wizard next to Search box.
  4. When the Windows Memory Diagnostic tool will show up, click Restart now and check for problems (Recommended) option.
  5. In a moment, computer will boot into a blue screen and the utility will begin detecting problems.
  6. After the diagnosis reaches 100%, Windows will reboot again.
  7. After coming back to the operation again, you will get a notification in the System Tray from Windows Memory Diagnostic tool.
  8. Check the report and if there is any problem, step out to take action accordingly.

4] Disable Fast Boot mode to resolve Fix INVALID_RUNDOWN_PROTECTION_FLAGS stop error

Windows 10 has an advanced feature to make the startup considerably quicker than usual and that is Fast Boot mode. Being well knows as Fast Startup, the process usually collects all the information from an ongoing session and use the saved data in the succeeding boot and make the startup faster. Undoubtedly this is one of the best features combining two separate power options i.e. shut and hibernate.

Fast Startup is enabled from the time you buy a Windows computer to make the system up and running quickly. There is a hiccup here as well as it may collect the data from Blue Screen error and save it for the next startup. Therefore instead of resolving the error, the same will be carried over to the following sessions again nevertheless you try to fix it. Though Fast Boot mode is a pre-enabled feature, you can override the settings anytime and disable it using the below guidelines –

  1. Open the Taskbar Search pressing Windows key and S together.
  2. Type Control Panel in the empty text space and Press Enter key.
  3. Once the Home page loads, Click Power Options.
  4. If the app UI shows categories only, click View by and select Small/Large icons.
  5. Once directed to the following page, click Choose what the power buttons do click lying on left pane.
  6. From the succeeding page, click the link that says Change settings that are currently unavailable.
  7. Hover down and reach to Shutdown settings area.
  8. Unmark the box set for Turn on fast startup (recommended).
  9. Finally, click Save changes button to disable Fast Startup.

5] Perform System Restore and roll back previous point of Windows

Windows has provided an outstanding technique to bypass a critical issue just by rolling back the full system to the previous state. The process is called System Restore pushes the system to a former point where you were not having the same trouble as now. In most cases, INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10 starts showing up after installing a new program, making an abnormal change to the system like forcibly canceling an ongoing task. Windows Registry encounters unexpected entries and tweaked in an abnormal way leading the system to the BSOD error.

If you are having the issue after carrying out such installing or similar tasks, we recommend performing System Restore. The system will only load back the previous state without hampering any internal settings. Hence it’s way safer than some other workarounds and the guidelines are as follows –

  1. Open Run pressing Windows key and R together.
  2. Enter “rstrui” in the text space followed by pressing the Enter key.
  3. In a few seconds, System Restore popup will be visible on display.
  4. From this wizard, click Next to proceed.
  5. After the following page arrives, put a checkmark to the box set for Show more restore points.
  6. When all the available points are available, select the most recent Restore point where you opt to roll back Windows.
  7. Hit the Next to proceed ahead.
  8. Upon opening the final page, click the Finish button.
  9. If a warning message shows up, click Yes to continue restoring.
  10. System will restart automatically after finishing the Restoring.
  11. When the system turns back to operation, you will see a confirmation message System Restore completed successfully ensuring the process is done.

6] Update all the drivers in Windows to solve INVALID_RUNDOWN_PROTECTION_FLAGS

While troubleshooting the Blue screen errors, experts pointed out driver issues to be generating the issue mostly. Despite these components maintains communication between the computer bus and external devices, outdated ones can cause severe damage to the system. These key components help the Windows to detect and recognize the hardware peripherals like mouse, keyboard, speaker, or printer.  Each of such function needs one driver and often a couple for executing the tasks.

Upgrading Windows is the best time to update all the drivers at the same time but most of us cut this off to save some time. Furthermore, vendors like Microsoft keeps on releasing the latest drivers in their authorized website regularly. When the drivers are not updated for long time, you may come across the INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10 eventually. For updating them, Windows Device Manager offers the best deal by identifying the outdated ones with yellow indication. Follow the below guidelines and update all the drivers using Device Manager –

  1. Open the Power user menu pressing Win+X hotkeys together.
  2. Select Device Manager from appearing list to open the app.
  3. After the app opens up in a separate window, check if any device has any mark of exclamation.
  4. Do right click on the driver having yellow indication only.
  5. Select Update Driver option from context.
Fix INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10
  1. After a popup arrives on display, click Search automatically for updated driver software option.
  2. Follow the on screen guidelines to complete the process.
  3. Repeat the same process to update all the drivers.
  4. Restart Windows 10 and check if there is any blue screen error in the system.

7] Uninstall a defective device driver or Roll back it to default

Updating the drivers usually resolve the blue screen error mostly unless something unexpected come across the way. Sometimes, the software vendors release defective updates having potentially harmful bugs in them. When you install those updates, which will cause additional damage let alone resolving the INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10. Some of us may also download the updated drivers from an authorized server and that will also generate BSOD error in the long run.

In order to avoid these unwanted problems, Device Manager offers two very prominent options namely uninstall device and roll back driver. Using them will remove the defective update to a driver and you can recover the computer from Blue screen error. Follow the below guidelines to perform these two tasks –

  1. Open up Windows Device Manager like the way used in previous method.
  2. When the window is upfront, reach the device that has received update recently.
  3. Double click it to split the hidden driver list.
  4. Right click the defective driver and select Properties option.
  5. When a popup comes in, enter to its Driver tab.
  6. Scroll down and click Roll back driver button.
  7. After the process ends, the defective update will be no longer available and the BSOD error must resolve.

In case Rolling back doesn’t resolve the error, you have to uninstall the defective device and then reinstall once the system is up and running smoothly. Follow the below guidelines to uninstall a defective update –

  1. Open the Device Manager and locate the driver that has received a problematic update.
  2. Right click the same and select Uninstall device option.
  3. Click Uninstall again once the warning message floats up.
  4. Follow the guidelines displayed and complete the process.
  5. Restart Windows and check if the error is fixed.
  6. Now, open the vendor’s official website for latest driver using the default browser.
  7. Download the compatible driver software and Install in the computer.

8] Run the Windows Blue Screen troubleshooter

In most cases, you won’t be able to find the exact cause that is generating the INVALID_RUNDOWN_PROTECTION_FLAGS BSOD error in Windows 10. The troubleshooting gets really tougher and with delaying to fix the error, the system starts getting irrecoverable problems. This problem was happening for a long time and people could not find a suitable tool to deal with it.

The Tech giants came up with a brilliant idea to troubleshoot Blue Screen error with a default tool that can detect the issue easily and shows right guidelines to resolve it. Despite the tool is placed in Control Panel, you can yet use the same directly from online platform. The guidelines are as follows –

  1. Launch the web browser from your computer.
  2. Edit the address bar and enter below URL –

https://support.microsoft.com/bn-bd/help/14238/windows-10-troubleshoot-blue-screen-errors

  1. Press Enter key and the browser will take you to Microsoft’s online troubleshooting web page.
  2. You can avail the same page by clicking this link directly.
  3. Hover down in the opened web page and reach to the When did you get the error? area.
  4. You will find some pre-determined causes listed here, choose any according to the problem you are getting.
  5. The page will be readjusted now and you will be able to see some stepwise tasks in order to fix the Blue Screen error.
  6. Follow them to the point properly and fix the error accordingly.

9] Clean junk files from disk drive and make space in it

Each computer comes with fixed disk storage which you can increase by modifying obviously but that is seldom necessary. The storage starts getting low with the passage of time and usage loads. When the space gets low, many of the issues ranging from slower operational speed, continuous lag, hanging of the desktop area to a critical fatality like INVALID_RUNDOWN_PROTECTION_FLAGS Blue screen error may come up. Some files in the storage usually don’t have any use, still, they manage to cover the storage being temporary files. Likewise, web cache files trashed recycle bin items cover up huge space in the drive. But the biggest one is the Windows Update log and previous Windows update files covering gigabytes of space. They are only useful if you opt to perform a System Restore and revert back Windows to the previous point.

To clean up these, Disk Cleaning tool is the best utility ever as you can choose the criteria from where to delete and erase them altogether in bulk amount. To run the tool, follow the below guidelines –

  1. Click the magnifier icon from the Taskbar and type cleanmgr.exe in the void space.
  2. Select Disk Cleanup app when arrives in the result.
  3. Immediately a small box will float up asking you to select the drive where you like to run the cleanup task.
  4. Choose C: Drive and then hit the Ok button.
  5. The tool will now calculate total recoverable space in the disk and as you to choose areas to delete.
  6. Click the Cleanup system files option from the bottom left corner of this window.
  7. From the upcoming popup, choose C: Drive again and hit Ok
  8. Now, Disk Cleanup for (C:) will appear after calculating total space again.
  9. From this window, Check all boxes from Files to delete area and leaving Downloads unmarked.
  10. Click Ok button and begin cleanup.
  11. Reboot the Windows after completing the action.

10] Make the BIOS up to date to fix INVALID_RUNDOWN_PROTECTION_FLAGS

BIOS is an integral part of the Operating System and its basically a ROM chip located on the Motherboards. Windows comes with BIOS from the time you buy a computer and the firmware helps users setting up a system from the very basic stage. It acts as an energizer of the system and also controls data flow from Operating System and the attached accessories such as video adapter, keyboard, mouse, printers, hard disk, etc.

Outdated BIOS makes the system technically unstable, non-functional as it fails to pass the control to the microprocessor. In the same way, this may lead the system to generate INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10.You can update the BIOS easily using the below guidelines –

  1. Invoke the Run dialog and type msinfo32 in the text box provided.
  2. Click Ok button located on wizard to open the System Information in a separate window.
  3. Move out to the bottom part and type BIOS in the search box.
  4. Press Enter key and to see the information regarding BIOS of your system.
  5. Note down the information shown in the adjacent right side pane for BIOS Version/Date.
  6. Launch any web browser and visit its maker’s web page for your BIOS.
  7. Locate the compatible BIOS file using information you found earlier.
  8. Download the latest and compatible BIOS file for your device.
  9. Run the file to install the latest version of BIOS.

11] Run the Windows security to clean all malware threats

The worst enemy of a computer in this high-tech world is the viruses threatening existence in every moment. These are powerfully coded programs that can sneak through the defense of a system easily and run riot. With internet facility becoming so easy, they can now disperse at a considerably faster means and stay in disguise under various links in websites, emails. Hence you are just a click away from getting affected by the spyware, internet worms, Trojans, etc. though they are used basically to hack the personal information, making fraudulent transactions, they will also cause corruption in the system files. They can also erase some potentially valuable dynamic link library (.dll) files and generate INVALID_RUNDOWN_PROTECTION_FLAGS BSOD error eventually.

Since most computers are connected to the internet 24/7, we have to create the strongest security system against these bugs. Windows Security is such a program build in rigid architecture and protects the system from any type of malware attack. You can run a full system scan using Windows Security to get rid of each threat. The guidelines are as follows –

  1. Press Windows key and open up Start menu.
  2. In the appearing app list, scroll down alphabetically and locate Windows Security.
  3. Select the app and open in a separate window.
  4. From UI, click Virus & threat protection option lying on the left pane.
  5. Jump to the adjacent right and click on Scan options link.
  6. After all the options being live, click radio button set for Full scan.
  7. Click Scan now button and begin malware search in the system.
  8. Once the scan ends, the tool will present detected list of threats on display.
  9. Click the Clean Threat option from this page.
  10. Upon shifting to the succeeding page, click Remove and then Start actions to clean up all the threats.

12] Uninstall non-essential applications

Software programs help in executing tasks smoothly and in a faster mean than approaching manually. Nevertheless, Windows has some of these programs by default; system needs some more to carry out specific tasks. Not all applications are default and available in the Microsoft Store. Some thorn party applications with bugs cause additional damage to the system too.

Some of the programs often have slightly different names but the same functionality with similar internal components. These programs can cause a software collision and lead the system to a critical crash and INVALID_RUNDOWN_PROTECTION_FLAGS BSOD error eventually. If you have installed some of these programs, uninstall them using below instructions –

  1. Invoke the Power user menu pressing Win+X hotkeys at once.
  2. Click the Apps and Features option from context.
  3. After the App Settings page opens, jump straight to the corresponding right side pane.
  4. Move out for the unnecessary application or problematic ones.
  5. Click the same and also hit Uninstall from extended pane.
  6. Tap the Uninstall button again from confirmation popup.
  7. Follow on-screen guidelines to complete the process.
  8. Once done, Restart Windows 10 to make the changes into effect.

13] Execute sfc/ scannow command and fix corrupted system components

Windows System files have some fixed components and definite structure arranged together to make it executable. Often these files are at risk of corruption due to malware attack or Windows updating faults. Furthermore, sudden power surge, power outage can also erase some internal components and make these files unreadable. The system cannot execute these files and generate the INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10.

The prerequisite to resolving blue screen error is to fix these key components as well as recover missing DLL files. For that, System File Checker will be the best utility being a built-in tool. You can execute it in Elevated Command Prompt with sfc /scannow command. To run, follow the below steps –

  1. Invoke the Run dialog and type cmd in its empty text area.
  2. Now, Press Ctril+Shift+Enter keys combined.
  3. When the UAC prompts up, click Yes to provide consent.
  4. In the black window appearing next, enter the below command –

Sfc /scanow

  1. Press Enter key to execute the command and run the System File Checker tool.
  2. The process will take quite longer as it needs to detect the components and fix.
  3. Once done, Restart the computer and check if BSOD has resolved once next session starts.

14] Uninstall defective Windows update patch

Microsoft releases regular updates containing latest changes and improved security features along with fixes for existing bugs. Installing these files is very much necessary and obviously an updated OS can stay away from various bugs than the outdated one. Since the process is autonomous, some partially buggy update may also make a way in the system. some may be stuck in an unexpected poor internet loop and get cracked partially. You may also get the INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10 after installing such update files.

After coming across a blue screen error upon installing a new update file, you have to remove it soonest. Microsoft has also kept a way out to uninstall the installed updates in the Control Panel. Follow the below steps to complete the task –

  1. Press Windows key and I at once and open up settings app.
  2. Click Update & Security tile to load the additional settings page.
  3. From the following page, select Windows Update lying on left pane.
  4. Jump to the corresponding right side, click View update history.
  5. After the succeeding window loads fully, click Uninstall updates link.
  6. In the newly opened Program and Features page, you will find the Installed Updates.
  7. Reach to the last installed patch in this list and right click it.
  8. Select Uninstall option and click Uninstall when the confirmation message pops out.
  9. Follow the on screen guidelines and compete the process.
  10. Reboot Windows 10 and check if the error is resolved.

15] Repair bad sectors in the hard disk

Bad areas in the hard disk cause huge damage in the system and are very much likely to generate INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10. Despite considering the hard disk as the soul of a system, most people don’t take good care of it. A magnetic fixed hard drive or the portable one may have two types of bad sectors in it namely hard and soft. Hard or physical hard disk bad sectors usually come with production faults and from external damage. The later one, Soft or logical bad areas are software related issues and caused by sudden power failure, forcibly pulling cable from CPU and production faults.

If you have the bad areas formed in the hard disk already, disk checking tool can detect and fix accordingly. The utility needs to be powered up upon execution of chkdsk command. To run this, follow the below guidelines –

  1. Open the Taskbar Search pressing Win+S hotkeys together.
  2. Type cmd.exe and right click Command Prompt when shows up in the result.
  3. Select Run as Administrator followed by clicking Yes when UAC prompts.
  4. When in the Elevated Command Prompt window, enter below command –

chkdsk /f /r C:

  1. Press Enter key to execute this command line tool.
  2. In the process, the tool will try detecting the bad sectors and repair them accordingly.
  3. Once finished, restart Windows and check if BSOD error is resolved.

16] Boot Windows 10 in Safe Mode with Networking

When the system is under a critical crash and cannot be started usually, Booting in the Safe Mode is the only way to make it up and running. This is usually a special startup method where Windows will load only essential programs and tools to run the OS. At the same time, it will also opt out unnecessary programs especially the third party ones for the sake of troubleshooting the fatality. As the third party programs will no longer be available, BSOD issue generated by them will be no longer available.

Booting in the Safe Mode can be another very useful technique to resolve the INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10. Along with the usual one, you can also try Safe Mode with Networking to use internet adapters. For enabling the Safe Mode with Networking, follow the below steps –

  1. Invoke Run dialog pressing Win+R hotkeys at once.
  2. Type msconfig in the search box and press Enter key.
  3. Once the System Configuration popup opens, enter into the Boot tab.
  4. Scroll down to the Boot options area and check the box that reads Safe boot.
  5. After the following options be active, select radio button set for Networking.
  6. For Booting in Safe Mode only, select the radio button set for Minimal.
  7. Click Apply button and then Ok to save the changes.
  8. Close System Configuration and open Start menu.
  9. Click the Power icon and Select Restart.
  10. System Will Boot to Safe Mode with Networking.

If this process fixes blue screen error, you can again disable Safe Mode by just unchecking the box set for Safe Mode in the System

17] Fix the corrupted Windows image files

Before each major Windows Upgrade, Microsoft releases ISO files in order to make an identical copy of that release. These components contain image files in ISO-9660 format and used for writing the CD-R or DVD-R drives. These are very sensitive contents and can be corrupted anytime by some third-party applications. In the end, they may also take part in generating the INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10.

Microsoft holds a very powerful tool in order to fix these corrupted windows image files and resolve BSOD error. The utility named Deployment Image Servicing and Management or simply DISM can be executed in the Elevated Command Promot. Here are the guidelines to run this tool –

  1. Open the Start menu pressing Windows key once.
  2. Click Power icon and select Restart option holding Shift button.
  3. Window after completing Rebooting, will boot to Automatic Repair.
  4. From the next blue screen, select Troubleshoot > Advanced options > Command Prompt.
  5. When the Elevated Command Prompt is up, enter the following text at blinking cursor –

DISM /Online /Cleanup-Image /RestoreHealth

  1. Activate the DISM tool pressing Enter key.
  2. Upon finishing the task, Restart the computer.
  3. Check if the BSOD error has resolved already.

18] Repair Hardware problems and dis-engage some peripherals to Fix INVALID_RUNDOWN_PROTECTION_FLAGS

Hardware accessories like Keyboard, mouse, speaker, printer can also cause INVALID_RUNDOWN_PROTECTION_FLAGS Blue Screen Error Windows 10 sometimes. Initially, you may check the Hardware drivers. If that doesn’t resolve the issue, try disconnecting the problematic hardware accessories. Some users have found this very effective in resolving the blue screen error. For that, disconnect first the accessories and perform a restart to Windows 10. Coming back to the following session, check if the issue is resolved perfectly and if you see no sign of BSOD error, reconnect the accessories again.

If the above trick fails to recover the computer from blue screen error, you may need to run the Hardware Troubleshooter. The handy utility is very prudent to fix hardware related issues in Windows 10 form the time it was introduced. Follow the below guidelines to run the troubleshooter –

  1. Get access to the Elevated Command Prompt using guidelines from above method.
  2. Enter the following command to the blinking cursor –

msdt.exe -id DeviceDiagnostic

  1. Press Enter key and the Hardware and Devices Troubleshooter page will open up immediately.
  2. From the popup, click Next button to go ahead.
  3. Detection will start right away from the tool traces out any trouble.

That’s all!!

   
 
 

Leave a Reply

Your email address will not be published. Required fields are marked *